LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Diagnostic Trouble Code (DTC) Detecting Criteria (H4DOTC) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0340 Camshaft Position Sensor "A" Circuit (Bank 1 Or Single Sensor) >> Diagnostic Method

Diagnostic Method

When normal, there should be 3 cam signals per 2 engine revolutions. If a condition where it is not 3 times continues, It is judged as NG.

When the engine speed is over 100 RPM, if the following conditions are established it is jugged as NG. Judge as OK and clear the NG when the following criteria are not established.

Judgment Value 

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Number of camshaft sensor signals during 2 revs. Not = 3
Engine speed ≥ 600 RPM

Time Needed for Diagnosis:  100 engine revs.

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judge as OK and clear the NG when the following criteria are established.

Judgment Value 

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Camshaft angle signal Exists