Cam Sprocket: Installation

Install the cam sprocket. To lock the camshaft, use the ST.
NOTE: Do not confuse the cam sprockets (LH) and (RH) during installation.

ST 499207400 CAM SPROCKET WRENCH

Tightening torque:

Tighten to 30 N.m (3.1 kgf-m, 22.1 ft-lb) of torque, and then tighten further by 45°.

Fig 1: Installing Cam Sprocket Using Cam Sprocket Wrench ST 499207400

ST 499977500 CAM SPROCKET WRENCH

Tightening torque:

Tighten to 30 N.m (3.1 kgf-m, 22.1 ft-lb) of torque, and then tighten further by 45°.

Fig 2: Identifying Camshaft Sprocket Wrench ST 499977500
Install the timing belt. < Ref. to INSTALLATION , Timing Belt. >
Install the timing belt cover. < Ref. to INSTALLATION , Timing Belt Cover. >
Install the crank pulley. < Ref. to INSTALLATION , Crank Pulley. >
Install the V-belts. < Ref. to INSTALLATION , V-belt. >