Glove Box: Removal

Disconnect the ground cable from battery.
Remove the console box. < Ref. to REMOVAL , Console Box. >
Remove the console front panel.

Fig 1: Identifying Console Front Panel Hooks

NOTE: For the AT model, remove the ring indicator. For the MT model, remove the shift knob.
Remove the console side garnish.

Fig 2: Identifying Console Side Garnish Hooks
Remove the front inside scuff plate (A) and front pillar lower trim (B). < Ref. to REMOVAL , Lower Inner Trim. >

Fig 3: Identifying Front Inside Scuff Plate And Front Pillar Lower Trim
Remove the clips, and remove the glove box lower cover.

Fig 4: Identifying Glove Box Lower Cover
Remove the console side panel.

Fig 5: Locating Console Side Panel Bolts
Remove the instrument panel side cover, and remove the clip.

Fig 6: Identifying Instrument Panel Side Cover Clips
Remove the screw, and remove the glove box.

Fig 7: Locating Glove Box Screws