LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Entertainment >> Noise Suppressor >> Removal >> Wagon Model

Wagon Model

  1. Disconnect the ground cable from the battery.
  2. Remove the rear gate trim. < Ref. to REMOVAL , Rear Gate Trim. >
  3. Disconnect harness connector from noise suppressor.
  4. Remove the screws and detach the noise suppressor.
    Fig 1: Locating Noise Suppressor Screws
    G05022575
scientia non olet · About LEMON Manuals