LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester X, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Installation

Brake Pedal: Installation

  1. Install in the reverse order of removal.
    CAUTION:
    • If the cable clamp is damaged, replace it with a new one.
    • Never fail to cover the outer cable end with boot.
    • Be careful not to kink the accelerator cable.
    • Always use new clevis pins.
  2. Adjust the clutch pedal. < Ref. to ADJUSTMENT , Clutch Pedal. >
  3. Inspect the brake pedal after installation. < Ref. to INSPECTION , Brake Pedal. >
scientia non olet · About LEMON Manuals