LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester X, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Clutch System) >> Clutch Pedal >> Disassembly

Clutch Pedal: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the clip, assist spring, rod and bushing.
    Fig 1: Identifying Clip, Assist Spring, Rod And Bushing
    G04994758
  2. Remove the spring pin and lever.
    Fig 2: Identifying Spring Pin And Lever
    G04994759
  3. Remove the clutch pedal and bushing.
    Fig 3: Identifying Clutch Pedal And Bushing
    G04994760
  4. Remove the stopper, clip, O-ring and rod S, and remove the spring S and bushing S.
    Fig 4: Identifying Stopper, Clip, O-Ring And Rod S, And Spring S And Bushing S
    G04994761
  5. Remove the stopper from the clutch pedal.
  6. Remove the clutch pedal pad.