LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Flexible Hose >> Removal

Flexible Hose: Removal

CAUTION:
  • When disconnecting/connecting hoses, do not apply excessive force them. Confirm that no torsion and excessive tension exist after installing.
  • Seal the disconnected hose with a plug or vinyl tape to prevent contamination from entering.
  1. Disconnect ground cable from battery.
  2. Using refrigerant recovery system, discharge refrigerant. < Ref. to OPERATION , REFRIGERANT RECOVERY PROCEDURE. >
  3. Remove duct (A).
    Fig 1: Locating Duct (A)
    G04991264Courtesy of SUBARU OF AMERICA, INC.
  4. Remove hose attaching bolts (C).
  5. Disconnect hose from evaporator unit.
  6. Disconnect hose from compressor.
  7. Remove low-pressure hose (A) from the vehicle.
  8. Remove hose attaching bolts (D).
  9. Disconnect hose from compressor.
  10. Disconnect hose from condenser.
  11. Disconnect high-pressure hose (B) from the vehicle.
    Fig 2: Disconnecting High-Pressure Hose (B) From Vehicle
    G04991282Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals