Rear Exhaust Pipe: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE: Replace gaskets and self-locking nuts with new ones.

Install rear exhaust pipe to muffler.
Tightening torque:

48 N.m (4.9 kgf-m, 35.4 ft-lb)

Fig 1: Connecting Rear Exhaust Pipe From Muffler
Courtesy of SUBARU OF AMERICA, INC.
Install rear exhaust pipe to center exhaust pipe.
Tightening torque:

18 N.m (1.8 kgf-m, 13.0 ft-lb)

Fig 2: Connecting Front And Center Exhaust Pipe Assembly
Courtesy of SUBARU OF AMERICA, INC.