Purge Control Solenoid Valve: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect battery ground cable.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which installs purge control solenoid valve onto intake manifold.

Fig 2: Identifying Purge Control Solenoid Valve Bolt
Courtesy of SUBARU OF AMERICA, INC.
Take out purge control solenoid valve through the bottom of the intake manifold.
Disconnect connector and hoses from purge control solenoid valve.

Fig 3: Disconnecting Connector From Purge Control Solenoid Valve
Courtesy of SUBARU OF AMERICA, INC.