Pressure Control Solenoid Valve: Removal

WARNING: This page is about a different variant/trim than selected.

Set the vehicle on the lift.
Disconnect battery ground cable.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Lift-up the vehicle.
Disconnect connector from pressure control solenoid valve.

Fig 2: Disconnecting Connector From Pressure Control Solenoid Valve
Courtesy of SUBARU OF AMERICA, INC.
Disconnect two evaporation hoses from pressure control solenoid valve.

Fig 3: Disconnecting Two Evaporation Hoses
Courtesy of SUBARU OF AMERICA, INC.
Remove pressure control solenoid valve from bracket.

Fig 4: Locating Pressure Control Solenoid Valve
Courtesy of SUBARU OF AMERICA, INC.