LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission Control (Aux. Emission Control Devices) (H4SO)) >> Fuel Temperature Sensor >> Installation

Fuel Temperature Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE: Replace a gasket with a new one.
    WARNING:
    • Ground cable must be connected.
    • Spark may occur and ignite if fuel is nearby.
    Fig 1: Locating Ground Cable
    G04988138Courtesy of SUBARU OF AMERICA, INC.