Fuel Tank Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Set the vehicle on the lift.
Open fuel flap lid, and remove fuel filler cap.
Disconnect battery ground cable.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Lift-up the vehicle.
Disconnect connector from fuel tank pressure sensor and fuel tank sensor control valve.
Disconnect pressure hose from fuel tank pressure sensor.

Fig 2: Disconnecting Pressure Hose From Fuel Tank Pressure Sensor
Courtesy of SUBARU OF AMERICA, INC.
Remove fuel tank pressure sensor and fuel tank sensor control valve with bracket.

Fig 3: Locating Fuel Tank Sensor Control Valve With Bracket
Courtesy of SUBARU OF AMERICA, INC.
Remove fuel tank sensor control valve from bracket.
NOTE: Fuel tank pressure sensor cannot be removed because it is integral with bracket.

Fig 4: Identifying Fuel Tank Pressure Sensor
Courtesy of SUBARU OF AMERICA, INC.