LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H4SO)) >> Valve Rocker Assembly >> Assembly

Valve Rocker Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install adjuster screw and nut to valve rocker.
  2. Arrange valve rocker arms, springs and shaft supports in assembly order and insert valve rocker shaft.

    Tightening torque (Shaft supports installing bolts): 

    5 N.m (0.5 kgf-m, 3.6 ft-lb) 

    NOTE: Valve rocker arms, rocker shaft and shaft supports have identification marks. Ensure parts with same markings are properly assembled.
  3. Install valve rocker shaft securing bolts.
scientia non olet · About LEMON Manuals