LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H4SO)) >> Timing Belt >> Inspection >> Timing Belt

Timing Belt

WARNING: This page is about a different variant/trim than selected.
  1. Check timing belt teeth for breaks, cracks, and wear. If any fault is found, replace belt.
  2. Check the condition of back side of belt; if any crack is found, replace belt.
    CAUTION:
    • Be careful not to let oil, grease or coolant contact the belt. Remove quickly and thoroughly if this happens.
    • Do not bend the belt sharply.

    Bending radius: h 

    60 mm (2.36 in) or more 

    Fig 1: Identifying Bending Radius Of Belt
    G04997661Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals