Timing Belt Cover: Installation

WARNING: This page is about a different variant/trim than selected.

Install front belt cover.
Tightening torque:

5 N.m (0.5 kgf-m, 3.6 ft-lb)
Install belt cover (LH).
Tightening torque:

5 N.m (0.5 kgf-m, 3.6 ft-lb)

Fig 1: Identifying Front Belt Cover
Courtesy of SUBARU OF AMERICA, INC.
Install crankshaft pulley. < Ref. to INSTALLATION , CRANKSHAFT PULLEY. >
Install V-belt. < Ref. to INSTALLATION , V-BELT. >