LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H4SO)) >> General Description >> Preparation Tool >> Special Tools

Special Tools

WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS CHART

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G04997552
 498267800 CYLINDER HEAD TABLE
  • Used for replacing valve guides.
  • Used for removing and installing valve springs.
G04997554
 498457000 ENGINE STAND ADAPTER RH Used with ENGINE STAND (499817000).
G04997555
 498457100 ENGINE STAND ADAPTER LH Used with ENGINE STAND (499817000).
G04997556
 498497100 CRANKSHAFT STOPPER Used for stopping rotation of flywheel when loosening and tightening crankshaft pulley bolt, etc.
G04997557
 498747300 PISTON GUIDE Used for installing piston in cylinder.
G04997558
 498857100 VALVE OIL SEAL GUIDE Used for press-fitting of intake and exhaust valve guide oil seals.
G04997559
 499017100 PISTON PIN GUIDE Used for installing piston pin, piston and connecting rod.
G04997560
 499037100 CONNECTING ROD BUSHING REMOVER & INSTALLER Used for removing and installing connecting rod bushing.
G04997564
 499097700 PISTON PIN REMOVER ASSY Used for removing piston pin.
G04997549
 18231AA010 CAMSHAFT SPROCKET WRENCH
  • Used for removing and installing camshaft sprocket.
  • CAMSHFT SPROCKET WRENCH (499207100) is also can be used.
G04997563
 499587700 OIL SEAL INSTALLER Used for installing cylinder head plug (camshaft, rear side).
G04997561
 499587200 CRANKSHAFT OIL SEAL INSTALLER
  • Used for installing crankshaft oil seal.
  • Used with CRANKSHAFT OIL SEAL GUIDE (499597100).
G04997568
 499597000 OIL SEAL GUIDE
  • Used for installing camshaft oil seal.
  • Used with CAMSHAFT OIL SEAL INSTALLER (499587500).
G04997569
 499597100 CRANKSHAFT OIL SEAL GUIDE
  • Used for installing crankshaft oil seal.
  • Used with CRANKSHAFT OIL SEAL INSTALLER (499587200).
G04997570
 499718000 VALVE SPRING REMOVER Used for removing and installing valve spring.
G04997573
 499767700 (Intake side) VALVE GUIDE ADJUSTER Used for installing intake side valve guides.
G04997574
 499767800 (Exhaust side) VALVE GUIDE ADJUSTER Used for installing exhaust side valve guides.
G04997571
 499767200 VALVE GUIDE REMOVER Used for removing valve guides.
G04997572
 499767400 VALVE GUIDE REAMER Used for reaming valve guides.
G04997575
 499817100 ENGINE STAND
  • Stand used for engine disassembly and assembly.
  • Used with ENGINE STAND ADAPTER RH (498457000) & LH (498457100).
G04997576
 499977100 CRANK PULLEY WRENCH Used for stopping rotation of crankshaft pulley when loosening and tightening crankshaft pulley bolts.
G04997579
 499987500 CRANKSHAFT SOCKET Used for rotating crankshaft.
G04988196
 498547000
(Outer diameter 80 mm (3.15 in) for oil filter)		 OIL FILTER WRENCH Used for removing and installing oil filter.
G04997577
 18332AA000
(Outer diameter 68 mm (2.68 in) for oil filter)		 OIL FILTER WRENCH Used for removing and installing oil filter.
G04997578
 18332AA010
(Outer diameter 65 mm (2.56 in) for oil filter)		 OIL FILTER WRENCH Used for removing and installing oil filter.
G04997566
 499497000 TORX® PLUS Used for removing and installing camshaft cap.
G04997562
 499587500 CAMSHAFT OIL SEAL INSTALLER Used for installing front camshaft oil seal.
G04997567
 499587100 OIL SEAL INSTALLER Used for installing oil pump oil seal.
G04997553
 498277200 STOPPER SET Used for installing automatic transmission assembly to engine.
G04997325
 42099AE000 CONNECTOR REMOVER Used for removing quick connector.
G04997550
 18482AA010 CARTRIDGE Troubleshooting for electrical systems.
G04997551
 22771AA030 SELECT MONITOR KIT Troubleshooting for electrical systems.
scientia non olet · About LEMON Manuals