LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Fuel Injection (Fuel Systems) (H4SO)) >> Throttle Body >> Installation

Throttle Body: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
  2. Install accelerator cable.

    < Ref. to INSTALLATION , ACCELERATOR CONTROL CABLE. >

    NOTE: Always use a new gasket.

    Tightening torque: Throttle body; 22 N.m (2.2 kgf-m, 15.9 ft-lb)