LH Side

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Replace O-rings with new ones.

Fig 1: Identifying O-Rings And Fuel Injector

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 5.0 N.m (0.51 kgf-m, 3.7 ft-lb)

Fig 2: Locating Fuel Pipe Bolt

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 19 N.m (1.9 kgf-m, 13.7 ft-lb)

Fig 3: Locating Injector Pipe Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 19 N.m (1.9 kgf-m, 13.7 ft-lb)

Fig 4: Locating Fuel Pipe Protector LH Bolts

Courtesy of SUBARU OF AMERICA, INC.