Transfer Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.

Using the ST, remove the roller bearing (extension case side).
ST 498077000 REMOVER

Fig 1: Removing Roller Bearing (Extension Case Side) Using Remover ST498077000
Courtesy of SUBARU OF AMERICA, INC.
Using the ST1 and ST2, remove the roller bearing (transfer case side).
ST1 498077000 REMOVER

ST2 899864100 REMOVER

Fig 2: Removing Roller Bearing (Transfer Case Side) Using Remover ST498077000 And ST2899864100
Courtesy of SUBARU OF AMERICA, INC.