Reverse Check Sleeve: NSPECTION

WARNING: This page is about a different variant/trim than selected.

Make sure the cutout section of reverse accent shaft is aligned with the opening in reverse check sleeve.
Spin the cam by hand for smooth rotation.
Move the cam and shaft all the way toward plate and release.
If the cam does not return properly, replace the reverse check spring; if shaft does not, check for scratches on the inner surface of sleeve. If sleeve is in good order, replace the spring.

Fig 1: Identifying Snap Ring, Reverse Check Plate, Check Spring And Check Cam
Courtesy of SUBARU OF AMERICA, INC.
Select a suitable reverse accent shaft and reverse check plate. < Ref. to ADJUSTMENT , Reverse Check Sleeve. >