LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Manual Transmission And Differential) >> Reverse Check Sleeve >> Adjustment >> Reverse Check Plate Adjustment

Reverse Check Plate Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. Shift the shifter arm to "5th" and then to reverse to see if reverse check mechanism operates properly.
  2. Also check to see if the arm returns to neutral when released from reverse position. If the arm does not return properly, replace the reverse check plate.
    REVERSE CHECK PLATE ANGLE SPECIFICATION

    Reverse check plate
    Part No. (A): No. Angle Ø Remarks
    32189AA000 0 28° Arm stops closer to 5th gear.
    32189AA010 1 31° Arm stops closer to 5th gear.
    32189AA020 2 34° Arm stops in the center.
    32189AA030 3 37° Arm stops closer to reverse gear.
    32189AA040 4 40° Arm stops closer to reverse gear.
    Fig 1: Identifying Reverse Check Plate Adjusting Angle
    G05003041Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals