Transfer Case Or Rear Case
WARNING: This page is about a different variant/trim than selected.
Neutral position adjustment
ADJUSTING SHIM THICKNESS SPECIFICATIONS
| Adjustment shim | |
|---|---|
| Part No. | Thickness mm (in) |
| 32190AA000 | 0.15(0.0059) |
| 32190AA010 | 0.30(0.0118) |
REVERSE ACCENT SHAFT REFERENCE
| Reverse accent shaft | ||
|---|---|---|
| Part No. | Mark | Remarks |
| 32188AA130 | S | Neutral position is closer to 1st. |
| 32188AA140 | T | Standard |
| 32188AA150 | U | Neutral position is closer to reverse gear. |
Reverse check plate adjustment
REVERSE CHECK PLATE ANGLE SPECIFICATION
| Reverse check plate | |||
|---|---|---|---|
| Part No. | Mark | Angle Ø | Remarks |
| 32189AA000 | 0 | 28° | Arm stops closer to 5th gear. |
| 32189AA010 | 1 | 31° | Arm stops closer to 5th gear. |
| 33189AA020 | 2 | 34° | Arm stops in the center. |
| 32189AA030 | 3 | 37° | Arm stops closer to reverse gear. |
| 32189AA040 | 4 | 40° | Arm stops closer to reverse gear. |