LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Manual Transmission And Differential) >> Drive Pinion Shaft Assembly >> Removal

Drive Pinion Shaft Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the manual transmission assembly from vehicle. < Ref. to REMOVAL , MANUAL TRANSMISSION ASSEMBLY. >
  2. Remove the transfer case with extension case assembly. < Ref. to REMOVAL , TRANSFER CASE AND EXTENSION CASE ASSEMBLY. >
  3. Remove the transmission case. < Ref. to REMOVAL , TRANSMISSION CASE. >
  4. Remove the drive pinion shaft assembly.
    NOTE: Use a hammer handle, etc. to remove if too tight.
    Fig 1: Identifying Main Shaft Assembly And Drive Pinion Shaft Assembly
    G04990963Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals