Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
- Abnormality Judgment
Judge NG when the cumulative time until completing the malfunction criteria below becomes more than time needed for diagnosis.
- Normality Judgment
Judge OK and clear the NG when the malfunction criteria below are not completed.
- Judgment Value JUDGMENT VALUE
Malfunction Criteria Threshold Value DTC Terminal voltage level when ECM out-puts OFF signal Low level P1492
P1494
P1496
P1498Terminal voltage level when ECM out-puts ON signal High level P1493
P1495
P1497
P1499Time Needed for Diagnosis : 2.5 seconds
Malfunction Indicator Light Illumination : Illuminates as soon as malfunction occurs.