Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
- Abnormality Judgment
Judge NG when one of the malfunction criteria below is completed.
- Judgment Value JUDGMENT VALUE (ABNORMALITY JUDGMENT)
Malfunction Criteria Threshold Value Continuous time of output voltage > 2.065 V (λ = 0.98) 3.4 seconds or more Continuous time of output voltage < 2.180 V (λ = 1.0) 3.4 seconds or more Time needed for diagnosis : 3.4 seconds
Malfunction Indicator Light Illumination : Illuminates as soon as malfunction occurs.
- Normality Judgment
Judge OK when all the malfunction criteria below are completed.
- Judgment Value JUDGMENT VALUE (NORMALITY JUDGMENT)
Malfunction Criteria Threshold Value Cumulative time of output voltage ≥ 2.065 V 0.2 seconds or more Cumulative time of output voltage ≥ 2.180 V 0.2 seconds or more