Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
Perform the diagnosis when the conditions below are not completed for more than 40 milliseconds on normal control.
- Vehicle speed is more than 10 km/h (6 MPH).
- Throttle sensor is more than a certain angle.
- Shifted to "D", "3", "2" or "1" range, and range signal is normal.
- More than 1 second passed after shift change finished.
Judgment Value
JUDGMENT VALUE
| Malfunction Criteria | Threshold Value |
|---|---|
| GR / (4th gear ratio) Where, GR = (vehicle speed sensor 1 output) / (turbine shaft speed sensor output) | > 110% or < 90% |
Time Needed for Diagnosis : 3 seconds
Malfunction Indicator Light Illumination : Illuminates when malfunction occurs in 2 continuous driving cycles.