Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
Judge NG when the continuous time until completing the malfunction criteria below becomes more than the time (2.5 seconds) needed for diagnosis, and also judge OK when the malfunction criteria below is not completed. And then clear NG.
Judgment Value
JUDGMENT VALUE
| Malfunction Criteria | Threshold Value |
|---|---|
| Terminal voltage level when ECM transmits OFF signal | Low level |
Time Needed for Diagnosis : 2.5 seconds
Malfunction Indicator Light Illumination : Illuminates when malfunction occurs in 2 continuous driving cycles.