Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| After engine starting | 40 sees, or more |
| Engine coolant temperature | ≥ 75°C (167°F) |
| Engine speed | 1,200 - 3,000 rpm |
| Intake manifold pressure | 13.3 - 36.0 kPa (100 - 270 mmHg, 3.94 - 10.63 inHg) |
| Estimated ambient temperature | ≥ 5°C (41°F) |
| Throttle position | < 1° |
| Battery voltage | > 10.9 V |
| Atmospheric pressure | ≥ 75.7 kPa (568 mmHg, 22.36 inHg) |
| Vehicle speed | ≥ 40 km/h (25 MPH) |
| Fuel shut-off function | In operation |
| Neutral switch | OFF, or within 1 second after changing from "ON" to "OFF" |
| After load input switch operation (air conditioner, power steering, lights, rear defroster, heater fun and radiator fan) | 5 sees, or more |