Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITON
| Secondary Parameters | Enable Conditions |
|---|---|
| Fuel learning system | In operation |
| Engine coolant temperature | 75 ← → 110°C (167 ← → 230°F) |
| Intake manifold pressure change during 50 msecs | ≤ 1.95 kPa (14.6 mmHg, 0.575 inHg) |
| Learning value of EVAP cone, during purge | ≤ 1.0 |
| Cumulative time of canister purge after engine start | 20 seconds or more |
| Continuous period after canister purge starting | 10 seconds or more |
| Intake air pressure | ≥ Map 3 |
Map 3
ENGINE SPEED MAP 3
| Engine speed (rpm) | idle | 800 | 1200 | 1600 | 2000 | 2400 | 2800 | 3200 | 3600 | 4000 | 4400 |
| Pressure kPa (mmHg, inHg) | na | 24.0 (180, 7.09) | 27.2 (204, 8.03) | 27.2 (204, 8.03) | 28.3 (212, 8.35) | 29.9 (224, 8.82) | 32.5 (244, 9.61) | 34.1 (256, 10.08) | 34.1 (256, 10.08) | 33.1 (248, 9.76) | 33.1 (248, 9.76) |