Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameter | Enable Condition |
|---|---|
| Closed loop control | In operation |
| Average lambda | 0.703 ← → 1.375 |
| After starting the engine | 225 seconds or more |
| Engine coolant temperature | ≥ 75°C (167°F) |
| Injector pulse | 1.792 ← → 4.032 milli-seconds |
| Engine speed | 1800 ← → 3000 rpm |
| Vehicle speed | ≥ 76 km/h (47 MPH) |
| Atmospheric air pressure | ≥ 76 kPa (568 mmHg, 22 inHg) |
| Throttle position change for 90 milliseconds | < 1.60° |
| Impedance of lambda sensor | 10 ← → 40 Ω |
| Misfire rate at engine 200 rev. | ≤ 1.0% |