Release Bearing

WARNING: This page is about a different variant/trim than selected.

NOTE: Since this bearing is grease sealed and is of a non-lubrication type, do not wash with gasoline or any solvent when servicing the clutch.

Check the bearing for smooth movement by applying force in the radial direction.
Radial direction stroke: 1.6 mm (0.063 in)

Fig 1: Identifying Bearing Case
Courtesy of SUBARU OF AMERICA, INC.
Check the bearing for smooth rotation by applying pressure in the thrust direction.

Fig 2: Checking Bearing
Courtesy of SUBARU OF AMERICA, INC.
Check wear and damage of the bearing case surface contacting with lever.