LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Clutch System) >> Clutch Pedal >> Assembly

Clutch Pedal: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Attach the stopper, etc. to pedal bracket temporarily.
  2. Clean inside of bores of clutch pedal and brake pedal, apply grease, and set bushings into bores.

    Grease: SUNLIGHT No.2 (Part No. 003602010) or equivalent 

  3. Align bores of pedal bracket, clutch pedal and brake pedal, attach the brake pedal return spring, assist rods, spring, and bushing.
    NOTE: Clean up inside of bushings and apply grease before installing the spacer.
scientia non olet · About LEMON Manuals