LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Lubrication (H4SO)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove generator from bracket. < Ref. to REMOVAL , GENERATOR. >
  2. Disconnect terminal from oil pressure switch.
    Fig 1: Identifying Oil Pressure Switch
    G04997911Courtesy of SUBARU OF AMERICA, INC.
  3. Remove oil pressure switch.
    Fig 2: Identifying Oil Pressure Switch
    G04997912Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals