LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Starting/Charging Systems (H4SO)) >> Battery >> Removal

Section 12 (Starting/Charging Systems (H4SO)): Battery: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove battery cable holder (A) from battery rod.
    Fig 1: Identifying Battery Cable Holder
    G04988709Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the positive (+) cable after disconnecting the negative (-) cable of battery.
  3. Remove flange nuts from battery rods and take off battery holder.
    Fig 2: Identifying Battery Rods Nuts
    G04988710Courtesy of SUBARU OF AMERICA, INC.
  4. Remove battery.