Drive Cycle F
WARNING: This page is about a different variant/trim than selected.
- Make sure that the engine coolant temperature at engine starting is less than 30°C (86°F)
- Warm up the engine until the engine coolant temperature rises for more than 95°C (203°F) from the level at engine start.
- Idle the engine for more than 10 minutes in the condition of step 2.
NOTE:
Do not disconnect the terminal of battery during diagnosis. (If disconnecting the terminal of battery, the data will be cleared.)
DIAGNOSTIC TROUBLE CODES REFERENCE CHART
| DTC | Item | Condition |
|---|---|---|
| P1448 | Fuel Tank Sensor Control Valve Range/Performance | - |