DTC P0512 - Starter Request Circuit -
WARNING: This page is about a different variant/trim than selected.
- DTC DETECTING CONDITION:
- Two consecutive driving cycles with malfunction
- TROUBLE SYMPTOM:
- Failure of engine to start
CAUTION:
After repair or replacement of malfunctioning parts, conduct Clear Memory Mode < Ref. to
OPERATION , CLEAR MEMORY MODE > and INSPECTION MODE < Ref. to
OPERATION , INSPECTION MODE. >
- WIRING DIAGRAM:
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK OPERATION OF STARTER MOTOR.
NOTE:
Place the inhibitor switch in "P" or "N" position (AT).
Depress the clutch pedal (MT). |
Does starter motor operate when ignition switch to "ON"? | Repair battery short circuit in starter motor circuit. | Check starter motor circuit. < Ref. to DIAGNOSTICS FOR ENGINE STARTING FAILURE . > |