RH Side

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.
Tightening torque (Spark plug): 21 N.m (2.1 kgf-m, 15 ft-lb)

CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

Tightening torque (Air cleaner case): 33 N.m (3.4 kgf-m, 24.6 ft-lb)