LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Stop Light Switch >> Removal

Stop Light Switch: Removal

  1. Disconnect ground cable from battery.
  2. Disconnect stop light switch connector.
  3. Loosen nuts, and unscrew stop light switch to remove.
    Fig 1: Identifying Stop Light Switch
    G03751864Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals