LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Proportioning Valve >> Installation

Proportioning Valve: Installation

  1. Install proportioning valve to bracket.
  2. Connect brake pipes correctly to proportioning valve.
  3. Bleed air, then check each joint of brake pipe for oil leaks.

    Tightening torque: 

    Proportioning valve to brake pipe flare nut: 

    15 N.m (1.5 kgf-m, 10.8 ft-lb) 

    Proportioning valve to bracket: 

    18 N.m (1.8 kgf-m, 13.0 ft-lb) 

scientia non olet · About LEMON Manuals