Brakes - Mechanical: General Description: Specifications
BRAKE SYSTEM SPECIFICATIONS
| Front disc brake | Size | 16 inch type | |
| Non-TURBO | With TURBO model | ||
| Type | Disc (Floating type, ventilated) | ||
| Effective disc diameter | 244 mm (9.61 in) | ||
| Disc thickness x Outer diameter | 24 x 294 mm (0.94 x 11.57 in) | ||
| Effective cylinder diameter | 42.8 mm (1.685 in) x 2 | ||
| Pad dimensions (length x width x thickness) | 117.8 x 50.5 x 11.0 mm (4.638 x 1.988 x 0.433 in) | ||
| Clearance adjustment | Automatic adjustment | ||
| Rear disc brake | Type | Disc (Floating type) | |
| Effective disc diameter | 254 mm (10.0 in) | ||
| Disc thickness x Outer diameter | 10 x 290 mm (0.39 x 11.42 in) | ||
| Effective cylinder diameter | 38.1 mm (1.500 in) | ||
| Pad dimensions (length x width x thickness) | 82.4 x 33.7 x 9.0 mm (3.244 x 1.327 x 0.354 in) | ||
| Clearance adjustment | Automatic adjustment | ||
| Master cylinder | Type | Tandem | |
| Effective diameter | 26.99 mm (17/16 in) | 25.4 mm (1 in) | |
| Reservoir type | Sealed type | ||
| Brake fluid reservoir capacity | 205 cm3 (12.51 cu in) | ||
| Brake booster | Type | Vacuum brake booster assisted type | |
| Effective diameter | 205 + 230 mm (8.07 + 9.06 in) | ||
| Proportioning valve | Split point | 2,942 kPa (30 kg/cm2 , 427 psi) | |
| Reducing ratio | 0.3 | ||
| Brake line | Dual circuit system | ||
| Brake fluid
CAUTION:
|
FMVSS No. 116, DOT3 or DOT4 | ||
NOTE:
For parking brake refer to GENERAL DESCRIPTION
, General Description
FRONT/REAR BRAKE AND PARKING BRAKE SPECIFICATIONS
| ITEM | STANDARD | SERVICE LIMIT | |
|---|---|---|---|
| Front brake | Pad thickness (including back metal) | 17 mm (0.67 in) | 7.5 mm (0.295 in) |
| Disc thickness | 24 mm (0.94 in) | 22 mm (0.87 in) | |
| Disc runout | - | 0.075 mm (0.0030 in) | |
| Rear brake | Pad thickness (including back metal) | 14 mm (0.55 in) | 6.5 mm (0.256 in) |
| Disc thickness | 10 mm (0.39 in) | 8.5 mm (0.335 in) | |
| Disc runout | - | 0.070 mm (0.0028 in) | |
| Parking brake | Inside diameter | 170 mm (6.69 in) | 171 mm (6.73 in) |
| Lining thickness | 3.2 mm (0.126 in) | 1.5 mm (0.059 in) | |
| Lever stroke | 7 to 8 notches/196 N (20 kgf, 44 lb) | ||
BRAKE PEDAL FORCE AND FLUID PRESSURE SPECIFICATIONS
| Brake pedal force | Fluid pressure | ||
|---|---|---|---|
| Brake booster | Brake fluid pressure without engine running | 147 N (15 kgf, 33 lb) | 588 kPa (6 kg/cm2 , 85 psi) |
| 294 N (30 kgf, 66 lb) | 1,569 kPa (16 kg/cm2 , 228 psi) | ||
| Brake fluid pressure with engine running and vacuum at 66.7 kPa (500 mmHg, 19.69 inHg) | 147 N (15 kgf, 33 lb) | 6,178 kPa (63 kg/cm2 , 896 psi) | |
| 294 N (30 kgf, 66 lb) | 9,709 kPa (99 kg/cm2 , 1,408 psi) | ||
BRAKE PEDAL FREE PLAY SPECIFICATIONS
| Brake pedal | Free play | 1 - 3 mm (0.04 - 0.12 in) [Depress brake pedal pad with a force of less than 10 N (1 kgf, 2 lb).] |