Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameter |
Enable Condition |
| Drain valve |
Open |
| Battery voltage |
>/= 10.9 V |
| Atmospheric pressure |
>/= 75.0 kPa (563 mmHg, 22.17 inHg) |
| Tank pressure when starter ON <-- --> OFF |
-0.43 <-- --> 1.43 kPa (-3.2 <-- --> 10.7 mmHg, -0.13 <-- --> 0.42 inHg) |