LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R VDC Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Diagnostic Trouble Code (DTC) Detecting Criteria (H4SO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0852 Neutral Switch Input Circuit High (Mt Model) >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

Judge NG when the malfunction criteria below are completed 3 time or more after the neutral SW change. Judge OK and clear NG if there is change in the neutral SW.

Judgment Value 

JUDGMENT VALUE REFERENCE

Malfunction Criteria Threshold Value
Neutral switch signal (while changing from a to b below) High
Driving condition change
  1. Vehicle speed = 0 km/h (0 MPH) & engine speed 600 - 900 rpm
  2. Vehicle speed >/= 64 km/h (40 MPH) & engine speed 1,600 - 2,550 rpm
a) to b)

Time Needed for Diagnosis:  3 monitoring

Malfunction Indicator Light Illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.