Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine speed | >/= 500 rpm |
| After engine starting | 1 second or more |
| Ignition switch | ON |
| Battery voltage | > 10.9 V |
| Idle switch | ON |
| Fuel level | 9.6 <-- --> 54.4 lambda (2.54 <-- --> 14.37 US gal, 2.11 <-- --> 11.97 lmp gal) |
| Vehicle speed = 0 km/h (0 MPH) | 10 seconds or more |