Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| After engine starting | 40 secs, or more |
| Engine coolant temperature | >/= 70°C(158°F) |
| Engine speed | 1,200 <-- --> 2,950 rpm |
| Intake manifold pressure (absolute pressure) | < 38.7 kPa (290 mmHg, 11.42 inHg) |
| Estimated ambient temperature | >/= 5°C(41°F) |
| Throttle position | < 0.25° |
| Battery voltage | > 10.9 V |
| Atmospheric pressure | >/= 75.0 kPa (563 mmHg, 22.17 inHg) |
| Vehicle speed | >/= 53 km/h (33 MPH) |
| Fuel shut-off function | Operation |
| Neutral switch | OFF and 1 second after changing from "ON" to "OFF" |
| Load (air conditioner, power steering, lights, rear defroster, heater fun and radiator fan) | 5 secs, or more no change |