Section 5 (Exhaust (H4SO)): Muffler: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Use a new gasket and self-locking nut.

Tightening torque:

48 N.m (4.9 kgf-m, 35.4 ft-lb)

LH side

Fig 1: Installing Self-Locking Nut (LH Side)
Courtesy of SUBARU OF AMERICA, INC.
RH side

Fig 2: Installing Self-Locking Nut (RH Side)

Courtesy of SUBARU OF AMERICA, INC.