Valve Spring
WARNING: This page is about a different variant/trim than selected.
- Check the valve springs for damage, free length, and tension. Replace the valve spring if it is not within the standard value presented in the table.
- To measure the squareness of the valve spring, stand the spring on a surface plate and measure its deflection at the top of spring using a try square.
LENGTH AND TENSION REFERENCE
| Free length mm (in) | 54.30(2.1378) | |
|---|---|---|
| Tension/spring height N (kgf, lb)/mm (in) | Set | 214 - 246 (22 - 25, 48 - 55)/45.0 (1.772) |
| Lift | 526 - 582 (54 - 59, 119 - 130)/34.7 (1.366) | |
| Squareness | 2.5°, 2.4 mm (0.094 in) | |