LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R VDC Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Automatic Transmission (Diagnostics) 4AT (D)) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

WARNING: This page is about a different variant/trim than selected.
  1. On the << Main Menu>> display screen, select the {Each System Check} and press the [YES] key.
  2. On the << System Selection Menu>> display screen, select the {Transmission} and press the [YES] key.
  3. Press the [YES] key after the information of transmission type is displayed.
  4. On the << Transmission Diagnosis>> display screen, select the {Clear Memory} and press the [YES] key.
NOTE: When {Clear Memory 2} is selected and executed, DTC and learned control memory is cleared. If Clear Memory 2 has been performed, execute the learning control. < Ref. to , FACILITATION OF LEARNING CONTROL , OPERATION, Subaru Select Monitor. >
scientia non olet · About LEMON Manuals