Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| After starting engine | 240 seconds or more |
| Engine coolant temperature at engine start | </= 40°C(104°F) |
| Engine coolant temperature | >/= 75°C(167°F) |
| Intake air temperature at engine start | >/= 0°C (32°F) |
| Estimate ambient temperature | >/= 0°C (32°F) |
| Vehicle speed | 65 km/h (40 MPH) |
| Engine speed | >/= 2400 RPM |
| Engine load | >/= 0.85 g (0.030 oz)/rev |
| Lambda value | 0.75 <-- --> 1.25 |