Enable Condition: Notes
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| All secondary parameters approval continuation time | 1 second or more |
| Intake manifold pressure change during 0.5 engine rev. | < 16.0 kPa (120 mmHg, 4.72 inHg) (MT) < 14.7 kPa (110 mmHg, 4.33 inHg) (AT) |
| Engine speed change | < 1000 rpm/32 milliseconds |
| Throttle position change during 16 milliseconds | < 14° |
| Fuel shut-off function | Not in operation |
| Atmospheric pressure | >/= 75.1 kPa (563 mmHg, 22.2 inHg) |
| Fuel level | >/= 9.6 L (2.54 US gal, 2.11 Imp gal) |
| Evaporative system leak check | Not in operation |
| Engine speed | 450 - 6700 RPM |
| Intake manifold pressure | > Map3 or more |
| Battery voltage | > 8 V |