Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine coolant temperature | >/= 75°C (167°F) |
| Battery voltage | >/= 10.9 V |
| Atmospheric pressure | > 75.1 kPa (563 mmHg, 22.2 inHg) |
| Fuel level | >/= 9 L (2.38 US gal, 1.98 Imp gal) |
| After starting engine | 10 seconds or more |
| Feedback in ISC | In operation |
| Measured lambda | 0.9 <-- --> 1.1 |
| After air condition switching ON-OFF, OFF-ON | 5 seconds or more |
| After in-manifold pressure change more than 4 kPa (30 mmHg, 1.2 inHg) | > 5 seconds |
| After neutral switch ON-OFF event | > 5.1 seconds |
| Vehicle speed | 0 km/h (0 MPH) |
| Throttle opening angle | < 0.25° |